OpenEye (Dynamic Integration)

Have more questions? Submit a request
Items (1).png

This integration requires a Class 2 License and a OpsLink Server. Please contact your account manager for more details.

 

Supported Features

  • Live Video
  • Live Video Quality Control
  • Camera Playback
  • PreAlarm Recording (SureView Response Pro Tier Only)
  • Sync

 

Integration Requirements

Version Requirements

Dynamic Integration - 1.5.2.1523

Device Server - 1.5.2.354

 

License Requirements

Please check with your OpenEye representative that the OpenEye API is accessible using your current license.

 

Network Requirements

IMPORTANT: The network requirements below apply to all network adapters on the OpsLink Server. If any network adapter does not have access to the list below (or general Internet access) the OpenEye will not be able to connect to cameras. Unused Network Adapters should be disabled rather than left disconnected.

From To Port Protocol Description
SureView device tier (SVDevices) OWS relay host — {{host}}, e.g. ows.openeye.net 443 HTTPS Login, sync, and live and recorded video

 

User Permission Requirements

TBD

 

SureView Sync Sync

Important

OpenEye uses a type of SureView syncing called "Device Sync".  This type of syncing is different to how most SureView integrations sync so it's important to carefully read the following Sync documentation before starting.

 

The integration can Sync the following device types:

  • NVRs (Network Video Recorders)
  • Cameras
  • Alarm Points (based on Cameras)

You will need to follow these Steps for each Area you want to sync in SureView (starting at Step 1 each time). 

 

NVR Sync Configuration (Sync Step 1)

Using the SureView Advanced Device Setup go to the Sync Tab and add OpenEye VMS as a new Sync System including the following fields

Host https://ows.openeye.net
Important: This must match the above URL exactly (including the https://)
Port 443
Username Openeye VMS Username
Password OpenEye VMS Password
ExtraValue

stun=stun.u5fgb.com;externalid=xxxx;

 

externalid=xxx is the the API token used for the Alarm Receiver (see Setup Alarms section below). This value is specified on the OpenEye platform when setting up the integration.

 

stun=stun.u5fgb.com

 

Area Sync (Sync Step 2)

Once you have saved your Sync Configuration (described above) you can then add the individual (1) Area Sync to synchronise OpenEye Devices (NVRs) against the required Area in SureView

  1. Go to the  Sureview "Syncs" tab (when adding or editing your Sync System from Step 1)
  2. Click Add Area Sync
  3. Complete the Area Sync Fields
Field Value
Title The friendly name for the Area Sync
Area Which SureView Area should the sync use when adding doors/alarms etc
Identifier

This is the identifier that you want to sync your Open Eye items against. 

DeviceName=xxx
CameraName=xxx

Note: Leaving the identifier blank will cause sync to bring in all Open Eye Devices / NVRs.

Each of these can synchronise on absolute values or make use of the * wildcard e.g.

 

Interval How often should the system sync into SureView?
default: 24 hours
Enabled

Enable or Disable the automatic Sync

default on

Allow Update Area Allows the sync to automatically move synced cameras/alarms to a different area

Default off

recommended to keep off
Allow update Device Settings

Allows the sync to automatically update the cameras/alarm settings

Default off

 

recommended to keep off

 

Alarm Setup

Alarms are received into SureView via the Open Eye HTTPS Alert Integration.  

  1. As a web services administrator: Login to Open Eye VMS Web Interface
  2. Go to Management > Integrations
    Integrations Dropdown.png
  3. Click the Add New Integration button
    Add New Integration button.png
  4. Select the Integration Alert Feed  (Type: Monitoring) from the list of Integrations and press Next
    Integration List Alert Feed.png
     
  5. In the General Settings tab, the Enable Alert Feed integration will already be checked by default. Leave it checked.
    Manage_Integrations_General_Settings.png
     
  6. Select the Alert Feed Tab.
  7. Under HTTPS Alert Push Integration - Enter a Name e.g.  "SureView Alarms"
  8. In the "Address? field" enter
    https://us.sureviewops.com:443/OpenEyeAlarmReceiver/alarms
    or
    https://eu.sureviewops.com:443/OpenEyeAlarmReceiver/alarms
    (depending on if you're a US or EU hosted customer)
    Manage_Integrations_HTTPS_Alert_Alert_Feed_tab.png
  9. Click Generate New Token to generate the API token / "externalid" that is used in the SureView Open Eye "Extra Value" filed
  10. Click Save

 

Alarm Types

This is the list of expected Alarm Types that the Open Eye can send. These can be customised within the SureView Event Types setup page

Event Code Event Title
0 NVR Abnormal restart
1 NVR Smart Pred Drive Failure
2 NVR Not Reporting
3 NVR Reporting
4 NVR Video Loss
5 NVR Video Return
6 Motion On
7 Motion Off
8 Sensor On
9 Sensor Off
10 Stateless Motion
11 Stateless Sensor
12 NVR Hard drive Missing
13 Service Abnormal Restart
14 NVR Raid Event
70 Area Armed
71 Area Disarmed
72 Area Late to Alarm
75 Door Open
78 Timeout Device (Panel Disconnected)
79 Panel Connected
80 Zone Alarm
81 Zone Alarm Fire
82 Zone Alarm Burglary
83 Zone Alarm Supervisory
84 Zone Alarm Panic
85 Zone Alarm Emergency
86 Zone Restore
88 Door Forced Open
89 Door Held Open
90 Access Location Locked Denied
91 Access Invalid Location
92 Access Invalid  Time
93 Access Passback Violation Denied
94 Access Invalid PIN
95 Access Invalid Level
97 Zone Alarm Day
98 Zone Alarm Night
99 Zone Alarm Exit
100 Analytic Tampering Started
101 Analytic Tampering Ended
102 Analytic Fog Detection Started
103 Analytic Fog Detection Ended
104 Analytic Passing Started
105 Analytic Passing Ending
106 Analytic Intrusion Started
107 Analytic Intrusion Ended
108 Analytic Entering Started
109 Analytic Entering Ended
110 Analytic Exited Started
111 Analytic Exiting Ended
112 Analytic Appearing Started
113 Analytic Appearing Ended
114 Analytic Loitering Started
115 Analytic Loitering ended
116 Analytic Gunshot Started
117 Analytic Gunshot Ended
118 Analytic Scream Started
119 Analytic Scream Ended
120 Analytic Explosion Started
121 Analytic Explosion Ended
122 Analytic Glass Break Started
123 Analytic Glass Break Ended
124 Analytic Audio Detection Started
125 Analytic Audio Detection ended
126 Analytic Face Detection Started
127 Analytic Face Detection Ended
128 Analytic Defocus Detection Started
129 Analytic Defocus Detection Ended 
133 Analytic Queue1 Started
134 Analytic Queue1 Ended
135 Analytic Queue2 Started
136 Analytic Queue2 Ended
137 Analytic Queue3 Started
138 Analytic Queue3 Ended
141 Analytic Person Detected
142 Analytic Person Detect Ended
143 Analytic Vehicle Detected
145 Analytic Vehicle Detect Ended
146 Analytic Thermal
149 Analytic License Plate Detected
150 Analytic Gun Detected
151 Analytic Gun Detect Ended
153 Analytic Scenario Started
154 Analytic Scenario Ended
512 Camera Status Images
1500 Environmental Health Index
1501 Environmental AQI
1502 Environmental PM25
1503 Environmental TVOC
1504 Environmental  CO2CAL
1505 Environmental NO2
1506 Environmental Humidity
1507 Environmental Temperature F
1508 Environmental Help
1509 Environmental Masking
1510 Environmental Aggression
1511 Environmental Gunshot
1512 Environmental Tamper
1513 Environmental Vape
1514 Environmental THC

 

Enabling PTZ

To enable operator controlled "Physical PTZ" Navigate to Device Setup - Camera Tab  and edit the individual camera. Within the Editing Camera box click the "PTZ" checkbox and Save.

2025-04-23 15_15_44-SureView Operations.png

 

Troubleshooting

Unable to sync in devices into SureView:

Please ensure that your user account has the correct permissions to view Companies and Devices within SureView. If you are unsure of this, please set the account to be an admin and trying syncing again:

  • If the sync is still unsuccessful with an OpenEye Admin account, please check that all of the other configuration for your devices is correct.
  • If all of the permissions and settings are correct, please reach out to help@sureviewops.com for further investigation

Articles in this section

Was this article helpful?
0 out of 0 found this helpful
Share

Comments

0 comments

Please sign in to leave a comment.